Vol. 4 (2026): Proceedings of 8th International Conference on Mechanical Engineering and Renewable Energy (ICMERE2025)

8th International Conference on Mechanical Engineering and Renewable Energy (ICMERE 2025)

The 8th International Conference on Mechanical Engineering and Renewable Energy (ICMERE 2025), organized by the Department of Mechanical Engineering of Chittagong University of Engineering & Technology (CUET), was held on 10–12 December 2025 in Chattogram, Bangladesh. The conference aims to bring together distinguished academicians, researchers, scientists, engineers, industry professionals, and students from around the world to exchange knowledge and share recent advances in Mechanical Engineering, Renewable Energy, and related disciplines. Through keynote lectures, invited talks, and technical sessions, ICMERE 2025 provided an international platform for presenting innovative research, discussing emerging technologies, fostering interdisciplinary collaboration, and developing future academic and industrial partnerships. The conference was intended to encourage creative and sustainable engineering solutions that contribute to technological advancement, community development, and the improvement of social and environmental well-being.

Published: 02.08.2026
Conference Dates: 10.12.2025 - 12.12.2025
Conference Location: Chittagong University of Engineering & Technology Chattogram Bangladesh

Articles

  • Comparative Analysis of Five Machine Learning Regression Models for Salinity Prediction in the California Current System

    Mohammed Joobayear Hossain, Abbas Ali Khan, Nahid Hasan Munna, Aminur Rahman, Forhad Mahmud (Author)
    1-6
    DOI: https://doi.org/10.38032/scse.2026.4.9

  • Evaluation of Evacuation Mapping in Industrial Fire Scenarios using CFD tools

    Md. Kharshiduzzaman, Musfiqul Azad , Syed Ishfaqul Hoque Rafsan, Mafrur Faharrim Khan , Redwanur Rashid , Md Foysal Mahmud (Author)
    7-12
    DOI: https://doi.org/10.38032/scse.2026.4.11

  • Comparative Assessment of Biodiesel Production and Properties from Waste Cooking Liquor, Olive Oil, and Mustard Oil through Transesterification Process

    Md. Mehedi Hasan , Shahil Jaher Mafin , Rakibul Hasan Fahad , Nasif Bin Nazrul , Md. Masud Rana , Fardin Faruk Khan , Md. Abdullah Al Mamun, Mohammad Nahidul Islam (Author)
    13-16
    DOI: https://doi.org/10.38032/scse.2026.4.15

  • Effects of Adding Natural Fillers on Textile Waste and Glass fiber Reinforced Hybrid Composite Materials

    Md Mustakim Ahmmad Hemel , Nafsheen Reza Reedeka , Nabila Chowdhury , Md. Mainul Islam , MS Rabbi , M.M.K Bhuiya (Author)
    17-22
    DOI: https://doi.org/10.38032/scse.2026.4.16

  • Removal of Pb²⁺ from Aqueous Solution Using Recycled Textile Waste as an Adsorbent

    Nabila Chowdhury , M S Rabbi , Md Mustakim Ahmmad Hemel (Author)
    23-28
    DOI: https://doi.org/10.38032/scse.2026.4.19

  • Design and Development of a Low-Cost Phototransistor-Based Pyranometer for Solar Resource Assessment

    Ishtiak Mohammad Zia , Md. Siam Hossain , Shanawas Sakrio , Professor Dr. Mazharul Islam (Author)
    29-34
    DOI: https://doi.org/10.38032/scse.2026.4.21

  • Enhanced Thermal Performance of Shell-And-Tube Heat Exchangers Using Fe3O4 and Al2O3 Nanofluids: A CFD-Based Comparative Study

    Asaduzzaman Sakib , Usama Ibn Aziz , Md. Samin Khan Hridoy , Fahim Tanvir , Swagoto Ray , Mohammad Nahidul Islam (Author)
    35-40
    DOI: https://doi.org/10.38032/scse.2026.4.24

  • Estimation of Optimum Tilt Angles for Solar Panels Across Chattogram Division of Bangladesh with Terrain-Based Comparison

    Md. Mahdi Islam , Mahadi Hassan Fahim (Author)
    42-45
    DOI: https://doi.org/10.38032/scse.2026.4.26

  • Exploring The Barriers to Artificial Intelligence Integration in Green Supply Chain Using Interpretive Structural Modeling Approach: Insights from Bangladesh's Multi-Stakeholder Perspective

    Jannatul Ferdaus Disha, Kazi Md. Tanvir Anzum , MD. Mahfuzur Rahman Masum , Md Faiaz Zaman Dehan , Istiak Mahmud (Author)
    45-50
    DOI: https://doi.org/10.38032/scse.2026.4.29

  • Fabrication and Characterization of Untreated Waste Paper and Banana Fiber Reinforced Hybrid Composite

    Nafsheen Reza Reedeka , Kazi Afzalur Rahman , Md Mustakim Ahammad Hemel (Author)
    51-56
    DOI: https://doi.org/10.38032/scse.2026.4.32

  • Synergistic Co-Digestion of Napier Grass, Banana Peel, and Cow Dung for Enhanced Biogas Yield

    Kowrin Kishor Roy , Paban Barua Nishan , Sajal Chandra Banik (Author)
    57-62
    DOI: https://doi.org/10.38032/scse.2026.4.37

  • A Comparative Analysis of Stent Performance in Aneurysm: Impact of Newtonian and Non-Newtonian Flow Dynamics

    Omi Dutta , Prasanjit Das (Author)
    63-67
    DOI: https://doi.org/10.38032/scse.2026.4.39

  • Design and Optimization of Lead-Free Chalcogenide Perovskite Solar Cells: 30.64% Efficiency with MgHfS₃ Absorber

    Omkar Chowdhury , Utsa Bhowmik (Author)
    68-72
    DOI: https://doi.org/10.38032/scse.2026.4.40

  • Lead-Free Fluoride Perovskite AgCdF₃ for High-Efficiency Solar Cells: A Simulation-Guided Study

    Utsa Bhowmik , Omkar Chowdhury (Author)
    73-77
    DOI: https://doi.org/10.38032/scse.2026.4.42

  • Design and Fabrication of One Shell Pass and Two Tube Pass Heat Exchanger

    Golam Saklayen , Bodius Salam , Md. Fardim Hasan Emon , Md. Mamunur Rahman (Author)
    78-86
    DOI: https://doi.org/10.38032/scse.2026.4.43

  • Optimizing Multi-Depot Vehicle Routing: An ABC-GA Hybrid Algorithm

    Md. Ashiqur Rahman Hridoy , Rafiatun Ferdous Khan Lubaba , Sanjeeb Roy , Deepta Dhar (Author)
    87-92
    DOI: https://doi.org/10.38032/scse.2026.4.44

  • Synthesis and Characterization of Enhanced Binary Carbonate Molten Salts Using Hybrid Nanoparticles (Al₂O₃–ZnO)

    Shoumik Joy , Md. Yasir Bhuiyan , A.S.M Sayem (Author)
    93-98
    DOI: https://doi.org/10.38032/scse.2026.4.45

  • Performance of Fin Enhanced Compact Heat Exchanger Using Experimental  Analysis

    Umme Habiba , Bodius Salam , Swadhin Ghosh , Md. Tuhin Mia (Author)
    99-104
    DOI: https://doi.org/10.38032/scse.2026.4.47

  • Operational Threshold-Embedded Machine Learning Models for Accurate Hydraulic Fracturing Monitoring

    Fardin Ahmed , Md. Nahul Rahman (Author)
    105-110
    DOI: https://doi.org/10.38032/scse.2026.4.57

  • Gesture Based Rover for Rapid Disaster Response

    Md. Nafis Mahmud , Arnob Roy , Samiul Kabir Rohan , Zibon Nesa Zim (Author)
    111-116
    DOI: https://doi.org/10.38032/scse.2026.4.59

  • Hybrid GWO-XGBoost Framework for Blast-Induced Ground Vibration Prediction: Integration of Genetic Algorithm-Optimized Scaled Distance

    Arnob Deb , Tahmid Zaman Raad , Pusmita Roy , Md Tauhidur Rahman (Author)
    117-122
    DOI: https://doi.org/10.38032/scse.2026.4.60

  • Biogenic Synthesis of Al-Mn doped ZnO nanoparticles: morphology, structure & photocatalytic activity

    Safat Anam , Israt Jahan Shammi , Md. Masumul Haque (Author)
    123-128
    DOI: https://doi.org/10.38032/scse.2026.4.62

  • A Comparative Analysis among Balsa, Pine, and Gamari as a Potential Piezoelectric Material

    Abu Bakkar, Chinmoy Deb Nath, Sajal Chandra Banik (Author)
    129-135
    DOI: https://doi.org/10.38032/scse.2026.4.63

  • Computational Analysis of Aerodynamic Performance in Conventional and Bio-Inspired Tubercled Aircraft Wings

    Mehrab Hossen , Sifat Perves , Farhan Sadik Rafi (Author)
    135-141
    DOI: https://doi.org/10.38032/scse.2026.4.65

  • Fabrication and Performance Analysis of Automobile Brake Pad, using Recycled and Eco-Friendly Materials

    Md. Ashraful Islam, Md. Mizanur Rahman , Abu Bakkar (Author)
    142-148
    DOI: https://doi.org/10.38032/scse.2026.4.67

  • Sustainable EOR Through Ion-Engineered Produced Water: A Smart Water Feasibility Study

    Tashdeed Rifa Raisa , Nowrin Afrin , Afsana Khanom Monika (Author)
    149-154
    DOI: https://doi.org/10.38032/scse.2026.4.72

  • Converting Waste Heat into Usable Electrical Energy Using Thermoelectric Generator

    Sadia Islam , S. C. Banik , Minhaz Uddin Midul , Marwa Asgar Tanha (Author)
    155-159
    DOI: https://doi.org/10.38032/scse.2026.4.76

  • Techno-Economic Analysis of Green Hydrogen Production Using Geothermal Energy from Barapukuria Coal Mine, Bangladesh

    K M Jahin, Noushad Zaman Efa , Afsana Khanom Monika (Author)
    160-164
    DOI: https://doi.org/10.38032/scse.2026.4.82

  • Quasi-Steady Aerodynamic Modeling and Performance Analysis of an Ornithopter

    Asma Azam , Sajal Chandra Banik (Author)
    165-170
    DOI: https://doi.org/10.38032/scse.2026.4.85

  • Repurposing Abandoned Hydrocarbon Wells for Geothermal Power in Northern Bangladesh: A Feasibility Study Toward Affordable and Sustainable Energy

    Nowrin Afrin , Afsana Khanom Monika , Tashdeed Rifa Raisa (Author)
    171-176
    DOI: https://doi.org/10.38032/scse.2026.4.90

  • Albatross and Peregrine Falcon Flight Inspired Biomimetic Wing Design: A Comparison with NACA 23015

    Anish Deb Turjo , Chandrima Deb , Mamjad Yousuf (Author)
    177-183
    DOI: https://doi.org/10.38032/scse.2026.4.96

  • Investigation of Tensile and Impact Properties of 3D-Printed Parts with Varying Nozzle Diameters and Infill Densities

    Md. Shahporan Rimon , Sajal Chandra Banik (Author)
    184-189
    DOI: https://doi.org/10.38032/scse.2026.4.100

  • Development and Experimental Assessment of a Controlled Corrosion Testing Apparatus for Mild Steel and ABS Steel

    Md. Ali Imran , Md. Arefin Kowser , Md. Fazle Rabbi, Asaduzzaman Mojumder, Md. Aubdullah Al Masud , Md. Talal Beg (Author)
    190-194
    DOI: https://doi.org/10.38032/scse.2026.4.102

  • Autonomous Threat Assessment and Maneuver Control for Unarmed Ships Using ML-Based Pirate Detection

    Md. Sabbir Ahmed , Zobair Ibn Awal (Author)
    195-200
    DOI: https://doi.org/10.38032/scse.2026.4.103

  • High-Performance Aluminium Hybrid Composited Reinforced with Zn, Sn and Ti for Lightweight Automotive and Advanced Structural Applications

    Md. Shahriar Islam , Paban Barua Nishan , Pritom Barua Shuvo (Author)
    201-206
    DOI: https://doi.org/10.38032/scse.2026.4.104

  • Study of Nuclear Thermal Propulsion for Interplanetary Missions: Case Study of Mars

    Niloy Bhowmick , Md. Tanvir Ahammed Shifat (Author)
    207-211
    DOI: https://doi.org/10.38032/scse.2026.4.105

  • Mapping the Future of Human Digital Twin Adoption in Job-shop Industries: A Strategic Prioritization Framework

    Samiran Sardar , Nasif Morshed , Shezan Ahmed (Author)
    212-217
    DOI: https://doi.org/10.38032/scse.2026.4.108

  • Mechanical and Microstructural Analysis of Nickel Foam Via Powder Metallurgy

    Md. Tuhin Mia , Prasanjit Das , Umme Habiba (Author)
    218-223
    DOI: https://doi.org/10.38032/scse.2026.4.113

  • Comparative Numerical Study of PCM and Air-Based Cooling for Li-Ion Battery Thermal Management: A CFD Approach

    Nafiz Imtiaz Rafi , Md. Rabbi (Author)
    224-228
    DOI: https://doi.org/10.38032/scse.2026.4.114

  • Predicting Ship Added Mass Coefficient with MACHINE LEARNING: Accuracy, Safety and Cost Savings

    MD. Ahasanul Kabir , AL-Amin Hossain Seam , Zobair Ibn Awal (Author)
    229-234
    DOI: https://doi.org/10.38032/scse.2026.4.115

  • Optimizing Perishable Supply Chains Under Stochastic Demand: Dynamic Pricing Versus Fixed Discount Strategies

    Shihab Uddin , Golam Sadek , Sanjeeb Roy , Mehedi Hasan , Abdul Rakib , Md. Ashiqur Rahman Hridoy (Author)
    235-240
    DOI: https://doi.org/10.38032/scse.2026.4.117

  • Vibration Frequency Prediction in Marine Vessels: A Synthetic Data Approach with Applications to Noise and Structural Integrity

    Al-Amin Hossain Seam , Md. Ahasanul Kabir , Zobair Ibn Awal (Author)
    241-246
    DOI: https://doi.org/10.38032/scse.2026.4.118

  • Effects of Inclined Magnetic Field and Higher-Order Velocity Slip on Boundary Layer Casson Nanofluid Flow over a Stretching Sheet

    Umme Hani , Mohammad Ali , Muhammad Shahnewaz Bhuyan , Rehena Nasrin (Author)
    247-252
    DOI: https://doi.org/10.38032/scse.2026.4.119

  • Defect Detection on Metal Surface Using Deep Learning Algorithms Based on Convolutional Neural Network

    Prottoy Dev , Aninda Chowdhury , Md Abdul Ahad Abir (Author)
    253-258
    DOI: https://doi.org/10.38032/scse.2026.4.120

  • Brownian Motion and Thermophoresis Effects on Boundary Layer Nanofluid Flow over an Inclined Porous Surface with Mass Flux Condition

    Joy Dev , Mohammad Ali, Umme Hani, Muhammad Shahnewaz Bhuyan (Author)
    259-264
    DOI: https://doi.org/10.38032/scse.2026.04.129

  • Integration of Radiomics and Deep Learning for Advanced MRI-Based Brain Tumor Characterization

    Tonmoy Kanti Shaha, Sampad Ghosh , Shamsul Enam Faruquei , Md Jafrul Hasan (Author)
    265-271
    DOI: https://doi.org/10.38032/scse.2026.4.131

  • Numerical Investigation of the Effects of Pressure Angle and Face Width on Bending Stress of A Spur Gear

    Atanu Barua , Md. Bayazid Ahmed , Wazed Ibne Noor (Author)
    272-276
    DOI: https://doi.org/10.38032/scse.2026.4.132

  • Environmental Sustainability of Waste-Derived Adsorbent: Insights from Life Cycle Assessment

    Md. Sidratul Montaha Hossain , Abdullah Al Mahmood , M. Bodiul Islam (Author)
    277-282
    DOI: https://doi.org/10.38032/scse.2026.4.135

  • Effect of Co-Doping on the Photocatalytic, Anti-Bacterial and Hydrogen Evolution Properties of Ag-TiO₂ Nanoparticles

    Md. Ahsan Tamjid Talha , Taufique Sami , Abdullah-Al-Mazed Khan , Md. Farhan Jakib , Ishtiak Mahmud (Author)
    283-288
    DOI: https://doi.org/10.38032/scse.2026.4.136

  • Numerical Investigation and Optimization of Heat transfer and ExergyLoss in Geometrically Modified Tube Heat Exchangers Using Nanofluids

    Faisal Iqbal , Prasanjit Das , Md. Hasin Arman (Author)
    289-294
    DOI: https://doi.org/10.38032/scse.2026.4.138

  • Effectiveness of Drag Reduction Device on Simplified Vehicle Model: A CFD Study

    Md. Bulbul Ahmed Rubel , Prasanjit Das Das , Itquan Hossen (Author)
    295-300
    DOI: https://doi.org/10.38032/scse.2026.4.139

  • Design and Construction of Boiling Heat Transfer Apparatus

    Mohammad Rahat Hosen , Paban Barua Nishan , Pritom Barua Shuvo , Bodius Salam (Author)
    301-306
    DOI: https://doi.org/10.38032/scse.2026.4.141

  • Development of a Fuzzy Risk Model for Criticality Analysis of a 25 MW Dual-Fuel Power Plant in Bangladesh

    Eshita Das , Mohammad Mizanur Rahman , Sangita Das (Author)
    307-312
    DOI: https://doi.org/10.38032/scse.2026.4.144

  • Effect of Cobalt Doped and Cobalt-Yttrium Co-doped TiO2 Particles Using Lagenaria siceraria (Molina) Peel Extract via Green Route for Enhanced Photocatalytic and Antibacterial Performance

    Abdullah-Al-Mazed Khan , Md. Nurul Islam , Md. Rasel Islam , Md. Farhan Jakib , Md. Al-Riad Tonmoy (Author)
    313-318
    DOI: https://doi.org/10.38032/scse.2026.4.149

  • Amino Functionalization of Boron Nitride: Structural, Surface, and Colloidal Characterization

    Sifat Kawsar , Abrar Rafid Siddique , Sayem Kawsar , Md. Sunjedul Islam , Shahla Rahman , Iftheker Ahmed Khan (Author)
    319-324
    DOI: https://doi.org/10.38032/scse.2026.4.151

  • Technoeconomic Assessment of Microbial Fuel Cell for Wastewater Treatment: Bangladesh Perspective

    Md. Sazid Khan , Anik Hasan Badhon, Md. Hasibul Hasan Himel , Mim Mashrur Ahmed (Author)
    325-329
    DOI: https://doi.org/10.38032/scse.2026.4.152

  • Aerodynamic Assessment of Leading-edge Tubercles on Variable-Camber NACA X410 Airfoils: A CFD Study

    Md. Jubayer Hasan Jim , Zannatul Mim , Nusrat Nawar Ahsan (Author)
    330-335
    DOI: https://doi.org/10.38032/scse.2026.4.154

  • Synthesis and Characterization of Acidic Steel Slag as Anode Material of Lithium-Ion Batteries

    Md Shamsul Islam , Md. Arafat Rahman , Konok Chandra Bhowmik , Rudra Barua , Shaswato Barua , Tauhidul Hossain , Syed Muhammad Sayem Hasan (Author)
    336-340
    DOI: https://doi.org/10.38032/scse.2026.4.155

  • Comparative Study of Crushing Loads of Porous Aluminium- and Copper-Oxides Synthesized Via Space Holding Sintering

    Mohammad Faisal , Mohammod Anwer Jahed , Md. Arafat Rahman, Shaswato Barua , Konok Chandra Bhowmik (Author)
    341-345
    DOI: https://doi.org/10.38032/scse.2026.4.156

  • Facile Fabrication of Silicon-Manganese Composite Anode from Steel Slag and Electrochemical Investigation for Li-Ion Batteries

    Prithwi Saha , Md. Arafat Rahman , Konok Chandra Bhowmik , Shaswato Barua , Rudra Barua , Syed Muhammad Sayem Hasan , Tauhidul Hossain (Author)
    346-350
    DOI: https://doi.org/10.38032/scse.2026.4.157

  • Experimental Investigation on Physical Properties of Local Furnace Bricks

    Md. Riadul Alam Hriday , Konok Chandra Bhowmik, Md. Arafat Rahman , Shaswato Barua (Author)
    351-355
    DOI: https://doi.org/10.38032/scse.2026.4.158

  • Investigation of Mechanical and Physical Characteristics of Coconut Petiole Fiber/Epoxy Bio-composites

    Kamrul Hasan Bappy , M S Rabbi , Bishal Chakma (Author)
    356-361
    DOI: https://doi.org/10.38032/scse.2026.4.162

  • Effect of Fishbone Ash on the Physical and Mechanical Properties of Artificial Teeth

    Md. Shamimur Rahman , Md. Abdul Ahad , Quazi Nazmul Arefin Sium , Sadia Samanta (Author)
    362-367
    DOI: https://doi.org/10.38032/scse.2026.4.166

  • Mechanical Response of Buckled Germanene: Influence of Temperature, Strain Rate and Point Defects

    Md. Riad Mostafa Mahfuz , Arman Hossain (Author)
    368-372
    DOI: https://doi.org/10.38032/scse.2026.4.167

  • Sustainable Production of Activated Carbon From Sugarcane Bagasse for Wastewater Treatment and Resource Management

    Suprova Haque , Istiak Ahmed Ovi , Tasdid Bin Kabir (Author)
    373-378
    DOI: https://doi.org/10.38032/scse.2026.4.168

  • Bioethanol (biofuel) Production from Tea Waste: A Comparative Study Using Cellulase enzyme, Baker’s Yeast, and Wild Saccharomyces Cerevisiae Cultivated from Rice bran in the context of Bangladesh

    Ashikur Rahman Khan Asik , Zannatul Nayem Showmik , Mohammad Nurur Rahman , Mohammad Moffajjel Hossain , Md. Masumul Haque , Md. Faruk Hasan , Aktarun Nahar , Runa Afroz Rintu (Author)
    379-384
    DOI: https://doi.org/10.38032/scse.2026.4.170

  • Numerical Analysis of Photovoltaic Solar Panels Integrated with Various Pin-Fin Structures

    Md. Mehedi Hasan Kazi , Asiful Haque , Shahriar Ahmed Ruman , Md. Arafat Rahman , Konok Chandra Bhowmik , Shaswato Barua (Author)
    385-390
    DOI: https://doi.org/10.38032/scse.2026.4.171

  • Study on Effect of Dimple on Aerodynamic Characteristics of NACA 0012 Airfoil

    B M Saif , Sudipto Tushar Das , Gazi Faisal (Author)
    391-396
    DOI: https://doi.org/10.38032/scse.2026.4.174

  • Ergonomic Design of Office Furniture Based on Anthropometric Measurement: A Case Study on KUET

    S. Razaul Karim Raju , Md. Golam Kibria , Md. Abu Bakkar Sikder , Md. Abu Syed Keron , Rishikesh Chowdhury (Author)
    397-402
    DOI: https://doi.org/10.38032/scse.2026.4.182

  • Prevention of Road Accident by Implementing the Driver Drowsiness Detection and Driver Alert System

    S. Razaul Karim Raju , Md. Abu Bakkar Sikder , Rishikesh Chowdhury (Author)
    403-408
    DOI: https://doi.org/10.38032/scse.2026.4.183

  • Dual Axis Solar Tracking with IoT-Based Load Monitoring System

    Md. Abu Bakkar Sikder , Joy Barua , S. Razaul Karim Raju , Meraz Ahammed (Author)
    409-412
    DOI: https://doi.org/10.38032/scse.2026.4.184

  • Numerical Investigation of Blood Flow in Arteries with Different Stenosis Geometries

    Swadhin Ghosh , Md. Mamunur Roshid , Umme Habiba , Dipannita Das Arpa (Author)
    413-417
    DOI: https://doi.org/10.38032/scse.2026.4.185

  • Extraction and Comparative Characterization of Starch from Seed Kernels of Two Mango Varieties in Rajshahi

    Bahktiar Ahmed Sajib , Ajmain Hasnat Alvi , Md. Mostafa Kamal , Pabitro Prosad Mondal (Author)
    418-423
    DOI: https://doi.org/10.38032/scse.2026.4.188

  • Inverse Estimation of Defect Distribution in Ceramics using Particle Swarm Optimization

    Mehedi Hassan Maruf, Mostafizur Rahman, Priyam Chakraborty (Author)
    424-428
    DOI: https://doi.org/10.38032/scse.2026.4.189

  • Study on Geothermal Energy Resources, Technologies and Future Directions in Bangladesh

    Sowrav Ghosh, Niloy Bhowmik , Arpita Roy (Author)
    429-442
    DOI: https://doi.org/10.38032/scse.2026.4.190

  • Numerical Investigation and Analysis on Thermal-Hydraulic Characteristics of an Elliptical Embossment Plate Heat Exchanger

    Md. Nahid Uddin Antor , Mohammed Istiak Ahamed, Ajgor Hossen , Syed Mohammad Faiaz Ul Alam , Elham Yunus , Mohammad Hasanur Rahman (Author)
    434-438
    DOI: https://doi.org/10.38032/scse.2026.4.192

  • Effectiveness of Egg Shell Powder on Enhancing the Mechanical Properties of Jute Fiber Mat-Reinforced Epoxy Composite

    Sopnil Ahmed , Md Arifuzzaman , Srijib Mukherjee , Nasif Shahriar , Md. Shariful Islam (Author)
    439-443
    DOI: https://doi.org/10.38032/scse.2026.4.194

  • Improving the Mechanical Properties of Jute Fiber Mat Reinforced Epoxy Composites Using Coir Micro-Fillers

    Nasif Shahriar, Md Arifuzzaman, Sopnil Ahmed, Srijib Mukherjee, Md Shariful Islam (Author)
    444-448
    DOI: https://doi.org/10.38032/scse.2026.4.195

  • Investigation on the Bending Characteristics of Variable Thickness Negative Stiffness Honeycomb Core

    Bickrom Saha , Md Arifuzzaman , Devashis Bagchi , Md Roknuzzaman , Md Shariful Islam (Author)
    449-453
    DOI: https://doi.org/10.38032/scse.2026.4.199

  • Effectiveness of Groundnut Shell Powder on Improving the Mechanical Properties of Jute Fiber Mat-Reinforced Epoxy Composites

    Srijib Mukherjee , Md Arifuzzaman , Nasif Shahriar , Sopnil Ahmed , Md. Shariful Islam (Author)
    454-459
    DOI: https://doi.org/10.38032/scse.2026.4.200

  • Experimental Investigation of False Ceiling Height on The Thermal Comfort of Building

    Md. Mahmodul Alam , Md. Akib Ul Islam , Tahmid Talukder , Md. Meraz Hasan , Md. Hasan Ali (Author)
    460-464
    DOI: https://doi.org/10.38032/scse.2026.4.201

  • Passive Flow Control Over NACA 23018 Airfoil Using Semi-Circular Dimples Across Different Reynolds Numbers

    Navid Ibne Newaz Chowdhury , Mohammad Tanveer Ahmed Rafi , Puspita Tasnim , S. M. Taufiq Imrose (Author)
    465-469
    DOI: https://doi.org/10.38032/scse.2026.4.205

  • Investigating the Effect of Crystallinity on PVDF-PMMA Polymer Blend and Analyzing its Dielectric and Piezoelectric Performance

    Pabitro Prosad Mondal , Abdullah Bin Asif , Rounak Jarin Turna , Adiba Tarannum , Md. Emdadul Hoque (Author)
    470-475
    DOI: https://doi.org/10.38032/scse.2026.4.211

  • Reducing Warranty Claims and Defects in a Motorbike Industry of Bangladesh Using Lean Six Sigma

    Mobassher Al Hasan, NAYAN NATH , MD MAHFUZUR RAHMAN (Author)
    476-481
    DOI: https://doi.org/10.38032/scse.2026.4.213

  • A Detailed Analysis of the Self-Healing Ceramic Matrix Composite for Aerospace Applications

    Kazi Tauhid Mokbul Hussain , Mohammad Tanveer Ahmed Rafi , Mahedi Al Mahin , Ricky Barua (Author)
    482-487
    DOI: https://doi.org/10.38032/scse.2026.4.216

  • Experimental Evaluation of Hydrochloric Acid Treatment on Sandstone Reservoir Properties

    Shah Poran Ebrahim , Istiaque Muhammad Khan , Muhammad Aslam bin Md Yusof , Mohammad Zahidul Islam , Md. Fahim Habib (Author)
    488-493
    DOI: https://doi.org/10.38032/scse.2026.4.218

  • A Comparative Study on The Efficacy of Modified Egg Shell for Removing Heavy Metals and Dye from Water

    Niloy Banik , Kamran Siddique , Safat Anam , Mohammad Nurur Rahman , Md. Masumul Haque (Author)
    494-500
    DOI: https://doi.org/10.38032/scse.2026.4.220

  • CFD-Derived Parasite-Drag Law of an Octocopter Airframe with Endurance Implications

    Kazi Tauhid Mokbul Hussain , Mobin Kabir , Irfan Talukder , Farhan Rahman Atul (Author)
    501-506
    DOI: https://doi.org/10.38032/scse.2026.4.223

  • Effect of Strontium Dopant on Dielectric Properties of BaTiO3

    Md Asif Shahriar , Md Mahfuzul Haque , Md. Mostafizur Rahman Suruj , Md Miftaur Rahman (Author)
    507-513
    DOI: https://doi.org/10.38032/scse.2026.4.224

  • A Review on Sustainable Ways to Make Hydroxyapatite for Wastewater Purification

    Md. Imrul Kayes , Md. Saiful Islam Shanto , Abdullah-Al-Mazed Khan , Md. Fardous Hasan Bappy , Habibur Rahman (Author)
    514-519
    DOI: https://doi.org/10.38032/scse.2026.4.229

  • Machine Learning-Driven Wind Resource Assessment In Cox’s Bazar, Bangladesh

    Sowrav Ghosh , Md. Ashikul Islam Soron (Author)
    520-524
    DOI: https://doi.org/10.38032/scse.2026.4.230

  • Investigation of Ionizing Radiation Shielding and Mechanical Properties of Tin-Based Metal Alloys

    Abdullah Al Mamun , Md. Sanaul Rabbi (Author)
    525-530
    DOI: https://doi.org/10.38032/scse.2026.4.233

  • Towards Next-Generation Lithium-Ion Batteries: The Promise of MXENE Materials

    Kazi Mamunur Rahman Rifat , Tamjid Hasan Anonno , Md. Mahmudul Hasan , Md. Farhan Jakib (Author)
    531-536
    DOI: https://doi.org/10.38032/scse.2026.4.234

  • Experimental Analysis of Microstructure and Mechanical Properties of Aluminum Metal Matrix Composite Reinforced with Different Materials

    S. M. Kamrul Hossen , Paban Barua Nishan , Pritom Barua Shuvo , Jamal Uddin Ahamed (Author)
    537-342
    DOI: https://doi.org/10.38032/scse.2026.4.235

  • MoS₂ Electrocatalysts for Hydrogen Evolution Reaction: Progress, Challenges, and Perspectives

    Md. Fardin Ahosan Sojib , Kazi Mamunur Rahman Rifat , Md. Abtahi Islam Fahim , Md. Saiful Islam Shanto , Md. Rasel Islam , Md. Sihabul Islam Arpon (Author)
    543-548
    DOI: https://doi.org/10.38032/scse.2026.4.238

  • Explainable AI-Based Geophysical Logging Parameters Selection for Enhancing Rock Brittleness Prediction

    Mohammad Islam Miah , Md. Maruf Alam , Travis Wiens (Author)
    549-554
    DOI: https://doi.org/10.38032/scse.2026.4.239

  • Impacts of Hemodynamic Parameter on Two Different Sac Size Aneurysm Model at End Systolic and End Diastolic Velocity and Its Variation with Time-Averaged Velocity

    Md. Parvez Mahmud, Md Ajwad Mohimin , Sultan Hussain Labib , Md. Mamunur Roshid (Author)
    555-560
    DOI: https://doi.org/10.38032/scse.2026.4.240

  • Synergistic Green Technologies for Sustainable Indoor Air Quality Management

    Md. Louckman Hossain , Md. Masumul Haque , Md. Sumon Munshi , Md. Mehedi Hasan (Author)
    561-566
    DOI: https://doi.org/10.38032/scse.2026.4.245

  • Bio-inspired Wing Morphologies for Underwater Gliders: Reducing Wake Instabilities and Resonance Risk

    Gazi Arman Hossain , Md Absar Jahan , Nayem Zaman Saimoon , Md. Fhamid Hasan , Mahadi Hasan Masud (Author)
    567-572
    DOI: https://doi.org/10.38032/scse.2026.4.253

  • Design and Efficiency Analysis of a Dual-Purpose Refrigeration System for Domestic Water Heating

    Emjad Mahmud Emon , Mohammed Saifuddin Munna , Nazia Sultana Plabon , Akramul Haque , Mubarrat E Ishmum (Author)
    573-577
    DOI: https://doi.org/10.38032/scse.2026.4.256

  • Analysis of Drag Reduction and Thermal Performance of Xanthan Gum-Water Mixtures in a Shell and Tube Heat Exchanger

    Meraz Ahammed , Md. Mahbubul Alam , Md.Abu Bakkar Sikder (Author)
    578-582
    DOI: https://doi.org/10.38032/scse.2026.4.263

  • Experimental Study on Thermal Performance of a Heat Pipe Using Different Refrigerants as a Working Fluid

    Mohammad Ayub Adar , Jamal Uddin Ahamed Ahamed , Rupak Saha , Sadia Nourin Mim , Ismail Hossain Hossain (Author)
    583-587
    DOI: https://doi.org/10.38032/scse.2026.4.266

  • Graphene Nano Powder Embedded Glass Fiber Composites for Enhanced Multifunctional Performance

    Habib Al Muntasir, Abrar Shahria , Md. Hasib Ibn Basher , Uzzal Roy , Sakif Al Shafi , Al Zabir Asadullah (Author)
    588-592
    DOI: https://doi.org/10.38032/scse.2026.4.273

  • Improving the Mechanical Properties of Jute Fiber-Mat Reinforced Epoxy Composite Incorporating Water Hyacinth Ash

    Arda Arefin Nir , Md Arifuzzaman , Sopnil Ahmed , Md. Jahid Hasan , Md Shariful Islam (Author)
    593-599
    DOI: https://doi.org/10.38032/scse.2026.4.274

  • Enhancing Fire Resistance of Bio-Composite (Wood Based) for Interior Applications: A Review & Future Directions

    Shuvendhu Malakar , Jannatul Tasnim , Md Sakib Hossain , Maria Mostari , Laylatul Sultana Troye (Author)
    600-605
    DOI: https://doi.org/10.38032/scse.2026.4.276

  • Comparison of Chromium and Zinc Biosorption Utilizing Leaves of Psidium Guajava

    Md. Osman Gani Abu Sayem , Md. Aminul Islam , Samima Afren Bhuian Sumi (Author)
    606-611
    DOI: https://doi.org/10.38032/scse.2026.4.280

  • Cadmium Removal Using Egg and Peanut Shell

    Samima Afren Bhuian Sumi , Md. Aminul Islam , Md. Osman Gani Abu Sayem (Author)
    612-617
    DOI: https://doi.org/10.38032/scse.2026.4.282

  • A Comparative Machine Learning Approach for Energy Consumption Prediction in Hybrid Vehicles

    Bishawajit Chakraborty Chakraborty , Arpita Paul Paul , Bhubon Thiotonius Costa Costa , MD. Shajratul Alam Towhid Towhid (Author)
    618-623
    DOI: https://doi.org/10.38032/scse.2026.4.283

  • Design of a 52-Seated Bus Shower Tester: Pressure Distribution Analysis

    Mohammad Shawkat Ali , Md. Rafayet Bin Ali , S. M. Mustakim Mahmud , Mohammad Mizanur Rahman (Author)
    624-429
    DOI: https://doi.org/10.38032/scse.2026.4.287

  • Triboelectric Nano-Generator to Produce Dc Current for Smart Textiles

    Hasib Ahmed , Sheikh Tamjidur Rahman , Suprova Haque (Author)
    630-635
    DOI: https://doi.org/10.38032/scse.2026.4.292

  • NiO and Co-Doped NiO Multifunctional Nanomaterials: Biogenic Fabrication for Enhanced Photocatalytic Activity

    Shah Sadia Rahman Joya , Md. Estabrak Ahammod Sakib , Md. Lael Hasan , Hridoy Roy , Md. Farhan Muskan (Author)
    636-641
    DOI: https://doi.org/10.38032/scse.2026.4.293

  • Optimizing Eco-Friendly Tin Perovskite Solar Cells via Novel Transport Layer configuration using SCAPS-1D Simulation

    Muhaiminul Islam, Prasanjit Das , Md Farhan Imtiaz Chowdhury , Wasif Sadman Tanim , Md Fahim Sadat Bari , Md. Shaib Hossain (Author)
    642-645
    DOI: https://doi.org/10.38032/scse.2026.4.297

  • Investigation on Physical and Mechanical Properties of Water Hyacinth Petiole Mat-Reinforced Epoxy-Based Composites

    Tufayel Ahmed , Md. Saif Hasan , Md. Arafat Rahman (Author)
    646-650
    DOI: https://doi.org/10.38032/scse.2026.4.298

  • Experimental Study on the Development and Performance Test of an Electro-Mechanical Plant Irrigation System

    Md. Ali Imran Khan , Rifat Ul Alam , K. M. Mahedi Hassan Fahim (Author)
    651-654
    DOI: https://doi.org/10.38032/scse.2026.4.299

  • A Review on Vacuum Bagged Natural Fiber Reinforced Polymer Composites

    Gogan Dhar , Md. Sanaul Rabbi (Author)
    655-660
    DOI: https://doi.org/10.38032/scse.2026.4.301

  • Numerical Investigation on the Performance of Solar Photovoltaic Shading Above Building Window

    Sheikh Zihad Al-Din , Mohammad Ariful Islam (Author)
    661-666
    DOI: https://doi.org/10.38032/scse.2026.4.302

  • Energy and Exergy Analysis of Recuperative Organic Rankine Cycle for Six Low-GWP Refrigerants

    Mostafizur Rahaman , Khaza Shahriar , Mohammad Ariful Islam (Author)
    667-672
    DOI: https://doi.org/10.38032/scse.2026.4.303

  • Upgrading of Waste Cooking Oil via Transesterification and Catalytic Hydrotreatment Process

    Irshad Jahan Tasin , Morsheda Begum , Muhammad Abdus Salam , Mohammad Rakib Uddin (Author)
    673-677
    DOI: https://doi.org/10.38032/scse.2026.4.304

  • Prediction of Porosity and Permeability Using Well Log and Core Data: A Data-Driven Approach

    Md Alamin Islam , Bintun Zaman , Shahria Nayem Ahmed (Author)
    678-683
    DOI: https://doi.org/10.38032/scse.2026.4.308

  • Design and Experimental Validation of a Piezoelectric Impact-Based Energy Harvester for Low-Frequency Oceanic Waves

    Ishaque Mozumder , Sajal Chandra Banik (Author)
    684-687
    DOI: https://doi.org/10.38032/scse.2026.4.309

  • Quadruped Robot Modeling by Mirroring Bipedal Robot for Trot Gait Simulation

    Abdulwadud Alatise , Raisuddin Khan , Amir Shafie (Author)
    688-692
    DOI: https://doi.org/10.38032/scse.2026.4.310

  • Production and Characterization of Third-Generation Biodiesel from Microalgae Oil

    Rupak Saha , Muhammad Mostafa Kamal Bhuiya , Md Aminul Islam , Itquan Hossen (Author)
    693-698
    DOI: https://doi.org/10.38032/scse.2026.4.313

  • Co-pyrolysis of Polypropylene Plastic Waste and Bamboo Sawdust by Infrared Wave

    Md. All Imran , M. M. K. Bhuiya , Iffat Azima Jiban , Itquan Hossen , Rupak Saha , Ankur Kumar Khan , Satu Sarkar (Author)
    699-703
    DOI: https://doi.org/10.38032/scse.2026.4.314

Preface

  • About the Conference (ICMERE2025)

    DOI: https://doi.org/10.38032/scse.2026.4.p1

  • Peer Review Statement (ICMERE2025)

    DOI: https://doi.org/10.38032/scse.2026.4.p2