Lead-Free Fluoride Perovskite AgCdF₃ for High-Efficiency Solar Cells: A Simulation-Guided Study

Utsa Bhowmik; Omkar Chowdhury

doi:10.38032/scse.2026.4.42

Authors

Utsa Bhowmik Department of Electrical and Electronic Engineering, CUET, Chattogram-4349, Bangladesh
Omkar Chowdhury Department of Electrical and Electronic Engineering, CUET, Chattogram-4349, Bangladesh

DOI:

https://doi.org/10.38032/scse.2026.4.42

Keywords:

Fluoride perovskite (AgCdF₃), High-efficiency solar cell, SCAPS-1D simulation, HTL/ETL optimization

Abstract

Lead-free fluoride perovskites are proving to be promising absorbers for next-generation solar cells due to their superior stability and environmentally friendly composition. In this work, we investigate AgCdF₃ as an absorber for single-junction perovskite solar cells using SCAPS-1D simulations, building upon insights from density functional theory. The proposed device architecture, ITO/ZrS₂/AgCdF₃/NiO/Au, was systematically optimized by examining hole and electron transport layers (NiO and ZrS₂), absorber and transport layer thicknesses, bulk and interface defect densities, and operating temperature. AgCdF₃ exhibits an indirect bandgap of 1.106 eV, a stable cubic structure, and enhanced ductility, indicating excellent mechanical robustness. Optimization results reveal that NiO as HTL and ZrS₂ as ETL provide ideal band alignment, minimal interfacial recombination, and efficient charge extraction. The absorber thickness of ~700 nm maximized photon absorption while balancing recombination losses. Bulk defect densities must be maintained below 10¹⁵ cm⁻³ to preserve high device performance, while interface defects significantly influence open circuit voltage and fill factor. Under optimized conditions, the simulated device achieved V_oc = 0.9081 V, J_sc = 41.316 mA/cm², FF = 87.28%, and a maximum power conversion efficiency of 32.75%, retaining 26.75% efficiency at 400 K, demonstrating remarkable thermal stability. These findings highlight AgCdF₃’s potential as a high-efficiency, thermally robust, and lead-free perovskite absorber, offering a viable pathway for environmentally sustainable and high-performance photovoltaic applications.

Downloads

PDF

Downloads

Download data is not yet available.

References

[1] Ye, T., Wang, K., Hou, Y., Yang, D., Smith, N., Magill, B., Yoon, J., Mudiyanselage, R.R.H.H., Khodaparast, G.A., Wang, K. and Priya, S., 2021. Ambient-air-stable lead-free CsSnI₃ solar cells with greater than 7.5% efficiency. Journal of the American Chemical Society, 143, pp.4319–4328. DOI: https://doi.org/10.1021/jacs.0c13069

[2] Stranks, S.D. and Snaith, H.J., 2015. Metal-halide perovskites for photovoltaic and light-emitting devices. Nature Nanotechnology, 10, pp.391–402. DOI: https://doi.org/10.1038/nnano.2015.90

[3] Izam, N.S.M.N., Itam, Z., Sing, W.L. and Syamsir, A., 2022. Sustainable development perspectives of solar energy technologies with focus on solar photovoltaic — a review. Energies, 15, pp.1–15. DOI: https://doi.org/10.3390/en15082790

[4] Kojima, A., Teshima, K., Shirai, Y. and Miyasaka, T., 2009. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. Journal of the American Chemical Society, 131(17), pp.6050–6051. DOI: https://doi.org/10.1021/ja809598r

[5] Jung, H.S. and Park, N.G., 2015. Perovskite solar cells: from materials to devices. Small, 11, pp.10–25. DOI: https://doi.org/10.1002/smll.201402767

[6] Green, M.A., Ho-Baillie, A. and Snaith, H.J., 2014. The emergence of perovskite solar cells. Nature Photonics, 8, pp.506–514. DOI: https://doi.org/10.1038/nphoton.2014.134

[7] Miyasaka, T., Kulkarni, A., Kim, G.M., Öz, S. and Jena, A.K., 2020. Perovskite solar cells: can we go organic-free, lead-free, and dopant-free? Advanced Energy Materials, 10, pp.1–20. DOI: https://doi.org/10.1002/aenm.201902500

[8] Orsch, G.H. and Paus, H.J., 1986. A new color center laser based on lead-doped KMgF₃. Optics Communications, 60, pp.69–73. DOI: https://doi.org/10.1016/0030-4018(86)90119-7

[9] Zhang, Y., Cleary, M., Wang, X., Kempf, N., Schoensee, L., Yang, J., Joshi, G. and Meda, L., 2015. High-temperature and high-power-density nanostructured thermoelectric generator for automotive waste heat recovery. Energy Conversion and Management, 105, pp.946–950. DOI: https://doi.org/10.1016/j.enconman.2015.08.051

[10] Snyder, G.J. and Toberer, E.S., 2008. Complex thermoelectric materials. Nature Materials, 7. DOI: https://doi.org/10.1038/nmat2090

[11] Liu, E., Negm, A. and Howlader, M., 2021. Thermoelectric generation via tellurene for wearable applications: recent advances, research challenges, and future perspectives. Materials Today Energy, 20, p.100625. DOI: https://doi.org/10.1016/j.mtener.2020.100625

[12] Zhang, F., Mao, Y., Park, T.J. and Wong, S.S., 2008. Green synthesis and property characterization of single-crystalline perovskite fluoride nanorods. Advanced Functional Materials, 18, pp.103–112. DOI: https://doi.org/10.1002/adfm.200700655

[13] Pu, W., Xiao, W., Wang, J., Li, X. and Wang, L., 2021. Screening of perovskite materials for solar cell applications by first-principles calculations. Materials & Design, 198, p.109387. DOI: https://doi.org/10.1016/j.matdes.2020.109387

[14] Zahra, F.T., Islam, M.M., Hasan, M.M., Islam, M.R. and Ahmad, S., 2024. DFT insights into the pressure-induced ultraviolet to visible band gap engineering of TlMgF₃ cubic halide perovskites for optoelectronic applications. Journal of Physics and Chemistry of Solids, 191, p.112037. DOI: https://doi.org/10.1016/j.jpcs.2024.112037

[15] Hossain, M.T., Hasan, M.M., Zahra, F.-T., Swargo, S., Dhroobo, R.A., Al Amin, M.R., Sieam, F.M.A., Disha, S.T. and Islam, M.R., 2024. A comprehensive DFT investigation of inorganic halide perovskites GaXCl₃ (X = Ca, Sr, and Ba) for optoelectronics application. Physica B: Condensed Matter, (2024), p.416131. DOI: https://doi.org/10.1016/j.physb.2024.416131

[16] Ravi, V.K., Yu, S.H., Rajput, P.K., Nayak, C., Bhattacharyya, D., Chung, D.S. and Nag, A., 2021. Colloidal BaZrS₃ chalcogenide perovskite nanocrystals for thin-film device fabrication. Nanoscale, 13(3), pp.1616–1623. DOI: https://doi.org/10.1039/D0NR08078K

[17] Zahra, F.-T., Hasan, M.M., Hossen, M.B. and Islam, M.R., 2024. Deep insights into the optoelectronic properties of AgCdF₃-based perovskite solar cell using the combination of DFT and SCAPS-1D simulation. Heliyon, 10, p.e33096. DOI: https://doi.org/10.1016/j.heliyon.2024.e33096

[18] Chabri, I., Benhouria, Y., Oubelkacem, A., Kaiba, A., Essaoudi, I. and Ainane, A., 2023. Numerical analysis of lead-free Cs₂SnI₆-based perovskite solar cell, with inorganic charge transport layers using SCAPS-1D. Journal of Electronic Materials, 52(4), pp.2722–2736. DOI: https://doi.org/10.1007/s11664-023-10235-x

[19] Mercy, E.N.V., Srinivasan, D. and Marasamy, L., 2024. Emerging BaZrS₃ and Ba(Zr,Ti)S₃ chalcogenide perovskite solar cells: a numerical approach toward device engineering and unlocking efficiency. ACS Omega, 9, pp.4359–4376. DOI: https://doi.org/10.1021/acsomega.3c06627